Product family view
Toolholding / SDJCR
SDJCR/L Turning Tool Holders
Compare the listed sizes and interfaces, then send your current model code or drawing for a matching tool.
external turning and facing with a matching insert
Rectangular shank screw-clamp holder
- System entries
- 14
- Compare
- Size · interface
- Send us
- Code / drawing
Holder Designation
Holder Models & Interfaces
Shank sizes are read from the listed designation. Confirm the drawing, length, insert seat and screw before order.
Swipe or scroll horizontally to view every column.
| Select | Holder model | Hand | Shank H × B (mm) | Insert family reference | Ordering check |
|---|---|---|---|---|---|
| SDJCR1010H07 | Right | 10 × 10 | DCMT / DCGT 07 | Confirm length, screw and seat | |
| SDJCL1010H07 | Left | 10 × 10 | DCMT / DCGT 07 | Confirm length, screw and seat | |
| SDJCR1212H07 | Right | 12 × 12 | DCMT / DCGT 07 | Confirm length, screw and seat | |
| SDJCL1212H07 | Left | 12 × 12 | DCMT / DCGT 07 | Confirm length, screw and seat | |
| SDJCR1212H11 | Right | 12 × 12 | DCMT / DCGT 11 | Confirm length, screw and seat | |
| SDJCL1212H11 | Left | 12 × 12 | DCMT / DCGT 11 | Confirm length, screw and seat | |
| SDJCR1616H07 | Right | 16 × 16 | DCMT / DCGT 07 | Confirm length, screw and seat | |
| SDJCL1616H07 | Left | 16 × 16 | DCMT / DCGT 07 | Confirm length, screw and seat | |
| SDJCR1616H11 | Right | 16 × 16 | DCMT / DCGT 11 | Confirm length, screw and seat | |
| SDJCL1616H11 | Left | 16 × 16 | DCMT / DCGT 11 | Confirm length, screw and seat | |
| SDJCR2020K11 | Right | 20 × 20 | DCMT / DCGT 11 | Confirm length, screw and seat | |
| SDJCL2020K11 | Left | 20 × 20 | DCMT / DCGT 11 | Confirm length, screw and seat | |
| SDJCR2525M11 | Right | 25 × 25 | DCMT / DCGT 11 | Confirm length, screw and seat | |
| SDJCL2525M11 | Left | 25 × 25 | DCMT / DCGT 11 | Confirm length, screw and seat |
No listed models match your search. Try a shorter code or describe your requirement.
Select a model above. You can also use the general quote button at the top of this page.
Have an existing part number or drawing? Include it in your inquiry for a direct match.
Compatibility Check
Holder, Insert & Clamp Matching
Confirm the insert family and size, holder hand, seat, screw, shim and clamp before ordering a replacement.
Swipe or scroll horizontally to view every column.
| Matching item | What to confirm |
|---|---|
| Insert | Confirm full insert designation, thickness, clearance, hole and screw. |
| Hand and shank | Match right/left cutting direction and the machine tool block. |
| Length and access | Confirm overall length, working clearance and overhang from the drawing. |
| Hardware | Match screw and wrench to the supplied holder; do not substitute by appearance. |
Setup Review
Setup & Operating Requirements
Machine interface, overhang, access, rigidity, operation and required quantity determine the quoted holder or system configuration.
Swipe or scroll horizontally to view every column.
| Selection input | Quotation requirement |
|---|---|
| Machine | Tool-block opening and permitted overhang |
| Insert | Complete model, chipbreaker and grade |
| Parts | Holder only or separately quoted insert / spare hardware |
| Order | Hand, quantity and destination |
Related Products
Ordering Support
Frequently Asked Questions
Does the holder include the pictured insert?
The insert illustrates the tool interface. Inclusion is confirmed in the quotation; do not assume an insert or spare hardware is included.
Can I use any DCMT / DCGT insert?
No. Match the full size, thickness, clearance, hole and clamping arrangement. The family name alone does not establish fit.
Does this holder have a VX carbide grade?
No. Carbide grades apply to the cutting insert. Holder selection uses its model, hand, shank and interface.
Are length, runout and delivery guaranteed by this table?
No. Confirm the drawing, inspection requirement, quantity and delivery at quotation. The table is a model-selection reference.
Specification-Led Quotation
Discuss Your Application
Send your model, material, operation and quantity.
We will review the tool interface and quotation variables before confirming an offer.