Product family view
Solid milling / 4-Flute
4-Flute Flat End Mills
Compare the complete E series model code, diameter, shank, cutting length and overall length before choosing a tool.
slotting, profiling and pocket milling with a compatible setup
4 Cutting Flutes
- Catalog models
- 18
- Dimensions
- D · Shank · H · L · Flutes
- Cutting edges
- 4 flutes
Size Range
Catalog Models & Dimensions
Search by complete designation, compare dimensions and select a model to include it in your inquiry.
How to choose
1 · Diameter: match D, shank, cutting length H and overall length L in the complete E series code.
2 · Application: this is a four flute flat end mill; provide the workpiece material and machining operation.
3 · Holding: match the actual shank to the collet or other holder before ordering.
Swipe or scroll horizontally to view every column.
| Select | Full model | D (mm) | Shank (mm) | H (mm) | L (mm) | Flutes |
|---|---|---|---|---|---|---|
| E-D1.0-3L-4F-4D-50L | 1.0 | 4 | 3 | 50 | 4 | |
| E-D1.5-4L-4F-4D-50L | 1.5 | 4 | 4 | 50 | 4 | |
| E-D2.0-6L-4F-4D-50L | 2.0 | 4 | 6 | 50 | 4 | |
| E-D2.5-8L-4F-4D-50L | 2.5 | 4 | 8 | 50 | 4 | |
| E-D3.0-8L-4F-4D-50L | 3.0 | 4 | 8 | 50 | 4 | |
| E-D4.0-11L-4F-4D-50L | 4.0 | 4 | 11 | 50 | 4 | |
| E-D5.0-13L-4F-6D-50L | 5.0 | 6 | 13 | 50 | 4 | |
| E-D5.5-16L-4F-6D-50L | 5.5 | 6 | 16 | 50 | 4 | |
| E-D6.0-16L-4F-6D-50L | 6.0 | 6 | 16 | 50 | 4 | |
| E-D7.0-20L-4F-8D-60L | 7.0 | 8 | 20 | 60 | 4 | |
| E-D8.0-20L-4F-8D-60L | 8.0 | 8 | 20 | 60 | 4 | |
| E-D9.0-22L-4F-10D-75L | 9.0 | 10 | 22 | 75 | 4 | |
| E-D10.0-25L-4F-10D-75L | 10.0 | 10 | 25 | 75 | 4 | |
| E-D11.0-26L-4F-12D-75L | 11.0 | 12 | 26 | 75 | 4 | |
| E-D12.0-30L-4F-12D-75L | 12.0 | 12 | 30 | 75 | 4 | |
| E-D16.0-45L-4F-16D-100L | 16.0 | 16 | 45 | 100 | 4 | |
| E-D18.0-45L-4F-18D-100L | 18.0 | 18 | 45 | 100 | 4 | |
| E-D20.0-45L-4F-20D-100L | 20.0 | 20 | 45 | 100 | 4 |
No listed models match your search. Try a shorter code or describe your requirement.
Select a model above. You can also use the general quote button at the top of this page.
Need another size? Search all catalog models →
Reach and Holder Fit
Geometry, Reach & Holder Fit
Confirm the cutting diameter, usable flute length, required reach, shank diameter and holder runout as one setup.
Swipe or scroll horizontally to view every column.
| Matching item | What to confirm |
|---|---|
| Tool shank | Match the E series shank diameter to the actual collet or holder bore. |
| Reach | Compare cutting length H and overall length L with the feature and tool projection. |
| Clamping system | Confirm collet size, holder gauge length and machine taper before quoting a set. |
Selection Checklist
Choose the Right Configuration
Compare the listed model with the actual part and machine setup.
Swipe or scroll horizontally to view every column.
| Check | What to provide or compare |
|---|---|
| Complete code | Use the listed E series D, shank, H and L dimensions. |
| Workpiece and cut | Give material, side milling / slotting / pocketing and required finish. |
| Holding | Give collet bore, spindle taper and safe projection. |
Tooling Package
Match the Cutting Tool to the Holder
Four-flute end mill + shank-matched ER32 collet/holder
Quote as one set
Quote the four flute flat end mill; add the correctly sized collet and holder only if requested and itemized.
Fit check
Compare shank diameter, cutting length, overall length and projection; confirm the machine-side holder interface.
Related Products
Ordering Support
Frequently Asked Questions
What should I send for a quotation?
Send the complete E series code or D, shank, cutting length, overall length, material and quantity.
Are the matching parts included?
The quotation lists the selected cutting tool, holder or body, and any specified clamping parts separately.
Can I request another size or configuration?
Yes. Send the existing full code or a dimensioned drawing so the proposed configuration can be checked.
Specification-Led Quotation
Discuss Your Application
Send your model, material, operation and quantity.
We will review the tool interface and quotation variables before confirming an offer.